Armor Epoxy Insulator — BANNER CREATIVE

A finish built for everyday living.

A two-component epoxy barrier undercoat designed to seal wood fibres and block moisture, oils and resins from the substrate. Use on properly prepared wood surfaces surfaces and follow the current Jewell product guidance.

Armor Epoxy Insulator — APPLICATION PHOTOGRAPH

The essentials.

PRODUCT-SHEET FACTS

PRODUCT TYPEtwo-component epoxy barrier coat
SUITABLE USEWood surfaces
FINISH / FORMSmooth
COVERAGENot available
COATSNot stated
DRYING / RECOAT40–60 minutes touch dry; approximately 6–8 hours sandable/recoat depending on conditions
PACK SIZESNot provided in available product-specific information

Why Armor Epoxy Insulator?

two-component epoxy barrier coat

Insulates against moisture, oils and resins

Superior insulation against oil, resins and moisture is stated in the source.

Excellent adhesion

Excellent adhesion is listed among the supplied product claims.

Helps prevent coating defects

The source says it helps prevent peeling, blistering and discoloration.

Compatible with multiple systems

Compatibility with PU, polyester, melamine and acrylic systems is specified.

Made for your kind of space.

Use on properly prepared wood surfaces walls. Ask a painter to confirm surface suitability.

Armor Epoxy Insulator — APPLICATION IMAGE

Wood surfaces before compatible coating systems

Discuss preparation and suitability with your painter.

Armor Epoxy Insulator — APPLICATION IMAGE

Wood preparation for PU, polyester, melamine or acrylic finish systems

Discuss preparation and suitability with your painter.

A finish for your space.

Not provided listed. Confirm current shade and base availability with Jewell.

FINISHED-ROOM PHOTOGRAPH1200 × 900 PX

SHADE OPTIONS

SHADESHADESHADESHADE

FINISH

Smooth

AVAILABLE BASES

Not provided

Ask about shades ↗

From start to finish.

FOLLOW CURRENT PRODUCT GUIDANCE

Prepare the wall

Use on appropriately prepared wood surfaces as an insulating undercoat.

Choose your method

Mix base and hardener in a 1:1 ratio by volume.

Apply the coats

Apply by brush, spray, roller or rag as listed.

Allow to dry

Mixed pot life is approximately 1–2 hours; sand/recoat at 6–8 hours or after full cure depending on conditions.

QUANTITY ESTIMATE

How much Armor Epoxy Insulator might you need?

Enter the paintable area. This page automatically uses the selected product's coverage and recommended coats.

PRODUCTArmor Epoxy Insulator
COVERAGE / COATSNot available
ESTIMATED QUANTITY— L

A coverage range is available, but a recommended coat count is not supplied; a total quantity estimate is therefore unavailable.

Everything in one place.

Open the product information in Jewell's product library. Add approved technical, safety and warranty documents through the site workflow.

Armor Epoxy Insulator — DOCUMENT PREVIEW
Armor Epoxy Insulator informationPRODUCT LIBRARY ↗
Technical data sheetADD APPROVED FILE
Safety informationADD APPROVED FILE
Warranty termsCONFIRM WITH JEWELL

A few things worth knowing.

Where can Armor Epoxy Insulator be used?+

Armor Epoxy Insulator is listed for wood surfaces use. Confirm substrate suitability and preparation before application.

How does the calculator work?+

It uses the coverage range and number of coats listed in this product information. For products without confirmed figures, estimation remains unavailable.

When can the next coat be applied?+

40–60 minutes touch dry; approximately 6–8 hours sandable/recoat depending on conditions is the drying or recoat information recorded for this product. Actual drying varies with site conditions.

What warranty applies?+

No warranty term is stated in the supplied product information.

CUSTOMER FAVOURITESA FEW FAVOURITES TO BEGIN WITH

A GOOD PLACE TO START

Find a finish
that feels like yours.

View all products ↗
THE JEWELL JOURNALALL STORIES ↗

THOUGHTS ON COLOR, CRAFT & HOME

Ideas to live
a little more colorfully.

Notes and inspiration for creating spaces with a little more meaning.

TESTIMONIALSSHARED BY THE PEOPLE WHO LIVE WITH JEWELL

Words that stay with us.

A GOOD FINISH MEANS SOMETHING

“
We chose Jewell paint for our home and the finish is stunning rich color smooth coverage long lasting quality truly transformed our space
RAJEEV SHARMA CUSTOMER
“
As an architect, I recommend Jewell paints for their rich pigmentation flawless finish durability and consistency they elevate every residential and commercial project.
SMITA JACOB ARCHITECT
“
For our resort, Jewell paints delivered vibrant colors weather resistance smooth finish and lasting elegance guests notice the difference immediately.
SATISH VERMA CUSTOMER

A mood for
every moment.

Start with how you want to feel.
Let the color follow.

Layers of inspiration.

Color stories, considered spaces and the latest from Jewell.